Plastics Recovery Facility: Difference between revisions
add page specific text |
m minor text change |
||
Line 1: | Line 1: | ||
[[Category:Technologies & Solutions]] | [[Category:Technologies & Solutions]] | ||
A | A [[Plastics Recovery Facility]] is often referred to as a [[PRF]] and is generically a facility that sorts, grades and prepares mixed [[Plastic]] waste fractions into separate fractions/polymers for onward use at [[Reprocessors]]. Many MRF operators that process [[Dry Mixed Recyclables]] (DMR) often separate 1 or 2 plastic polymer types, but often a MRF will undertake basic sorting for onward 'polishing' and processing in a PRF to achieve higher quality material separation and preparation of the plastic polymer or polymers that it focuses on. | ||
Many also refer to a PRF as a '''Plastics Recycling Facility''', which may be correct if the PRF undertakes sufficient processing of a particular polymer or polymers to allow it to be used directly by a plastics manufacturer/extruder/molder. Such preparation may include washing followed by flaking and/or extrusion into pellets/granules to achieve a quality that is high enough such that it can be used directly in plastics processing. These processed plastic pellets are sometimes called '''nurdles'''. | Many also refer to a PRF as a '''Plastics Recycling Facility''', which may be correct if the PRF undertakes sufficient processing of a particular polymer or polymers to allow it to be used directly by a plastics manufacturer/extruder/molder. Such preparation may include washing followed by flaking and/or extrusion into pellets/granules to achieve a quality that is high enough such that it can be used directly in plastics processing. These processed plastic pellets are sometimes called '''nurdles'''. |
Latest revision as of 14:52, 9 December 2020
A Plastics Recovery Facility is often referred to as a PRF and is generically a facility that sorts, grades and prepares mixed Plastic waste fractions into separate fractions/polymers for onward use at Reprocessors. Many MRF operators that process Dry Mixed Recyclables (DMR) often separate 1 or 2 plastic polymer types, but often a MRF will undertake basic sorting for onward 'polishing' and processing in a PRF to achieve higher quality material separation and preparation of the plastic polymer or polymers that it focuses on.
Many also refer to a PRF as a Plastics Recycling Facility, which may be correct if the PRF undertakes sufficient processing of a particular polymer or polymers to allow it to be used directly by a plastics manufacturer/extruder/molder. Such preparation may include washing followed by flaking and/or extrusion into pellets/granules to achieve a quality that is high enough such that it can be used directly in plastics processing. These processed plastic pellets are sometimes called nurdles.