Cement Kilns: Difference between revisions

From Wikiwaste
Bin52 (talk | contribs)
m minor text changes
Bin52 (talk | contribs)
m minor text changes
Line 64: Line 64:
| West Thorrock || [[Tarmac]] || Blending only
| West Thorrock || [[Tarmac]] || Blending only
|}<ref>[https://cement.mineralproducts.org/documents/MPA_Cement_SD_Report_2019.pdf MPA Cement Sustainability report 2019]</ref>.
|}<ref>[https://cement.mineralproducts.org/documents/MPA_Cement_SD_Report_2019.pdf MPA Cement Sustainability report 2019]</ref>.
==Wastes Used==


==References==
==References==
<references />
<references />

Revision as of 19:33, 7 April 2020

The production of cement utilizes waste materials in two primary ways, firstly using specific Industrial Waste and Mining & Quarrying Waste (and waste from the kiln part of the process itself) as additives and replacement for traditional raw materials, and secondly as a fuel to substitute for the use of traditional fossil fuels in a cement kiln. In 2018 1,414,195 tonnes of waste was used as raw materials and fuel in the production of cement, with just over 43% of kiln thermal input replaced by Waste Derived Fuel. The five companies manufacturing cement together supplied 78% of the cement consumed in the market in 2018. [1].

The Process

There are six main stages of cement manufacture[2]:

  • Stage 1 - Raw Material Extraction: raw ingredients include limestone, sand and clay, shale, fly ash, mill scale and bauxite. Materials are mined, crushed and reduced in size.
  • Stage 2 - Grinding, Proportioning and Blending: the production of a fine homogeneous mix with additives that comprises primarily around 80% limestone and 20% clay.
  • Stage 3 - Pre-heating Raw Material: a pre-heating chamber using kiln 'exhaust' gases to reduce energy consumption and pre-condition the raw material into oxides.
  • Stage 4 - Kiln Phase: the principle phase which produces a clinker, exiting the kiln in marble-sized nodules - it is the binder that is use din cement products.
  • Stage 5 - Cooling and Final Grinding: the clinker is rapidly air-cooled and gypsum (and other active ingredients as required) is added to the clinker and ground to a fine power to produce cement
  • Stage 6 - Packing and Shipping: the cement is conveyed from grinding mills to silos where it is then packed in bags.

The introduction of waste materials - or 'Alternative Raw Materials' as coined by the industry - can be as part of the kiln phase or the final grinding stage and the percentage of recycled content of cement was almost 10% across these in 2018.

Not all cement kilns have have the total 'end to end' process on site, with some sites producing the clinker for subsequent grinding, blending and packing at a different site. This might include, for example, the introduction of other materials, such as Blast Furnace Slag to produce a Blast Furnace Cement - a highly sulphate resistant cement that can have up to 65% granulated Blast Furnace Slag mixed with the clinker. As Blast Furnace Slag is considered a primary input for this type of cement, it is not defined as waste and therefore is not normally captured in UK Waste Tonnage.


List of Cement Kilns

More detailed information can be found by clicking through to the site-specific page:

Cement Kilns in the UK
Cement Kilns in the UK
ID Site Name Operating Company

1. Aberthaw Cement Kiln Tarmac
2. Cauldon Cement Kiln Aggregate Industries t/a Lafarge Cement
3. Cookstown Cement Kiln Aggregate Industries t/a Lafarge Cement
4. Tarmac Ltd, Dunbar Plant Tarmac
5. Hope Cement Kiln Breedon Cement
6. Ketton Cement Kiln Hanson Cement
7. Padeswood Cement Kiln Hanson Cement
8. Ribblesdale Cement Kiln Hanson Cement
9. Rugby Cement Kiln Cemex
10. South Ferriby Cement Kiln Cemex
11. Tunstead Cement Kiln Tarmac
12. Purfleet Cement Kiln Kerneos
13. Tilbury Cement and Ash Plant Cemex
14. Dagenham Cement Depot Breedon Cement
15. Dewsbury Cement Depot Breedon Cement
16. Reading (Theale) Cement Depot & Concrete Plant Breedon Cement
17. Walsall Cement & Aggregates Depot Breedon Cement
18. Barnstone Cement Plant Tarmac
19. Celtic Ash Tarmac
20. Tarmac Northfleet Works Tarmac
21. Seaham Depot Tarmac
22. ScotAsh Tarmac
23. Tarmac Thurrock Wharf Tarmac




List of Grinding and Blending Sites

Site Company Process
Tilbury Cemex Grinding and Blending
Dagenham Breeden Blending only
Dewsbury Breeden Blending only
Theale Breeden Blending only
Walsall Breedon Blending only
Barnstone Tarmac Grinding only
Celtic Ash Tarmac Blending only
Northfleet Tarmac Blending only
Seaham Tarmac Blending only
Scotash Tarmac Blending only
West Thorrock Tarmac Blending only

[3].

Wastes Used

References