Oldham Clinical Waste Incinerator: Difference between revisions

From Wikiwaste
Northern Chick (talk | contribs)
→‎Plant: new text
Northern Chick (talk | contribs)
→‎Plant: new text
Line 6: Line 6:


==Plant==
==Plant==
Waste is loaded mechanically into the Primary Chamber using a hydraulic lift and tip arrangement, to avoid any manual handling of the waste<ref name="SRCL" />. The rotating action of the kiln provides good mixing of the waste, exposing fresh surfaces to combustion conditions<ref name="SRCL" />. The combustion process is operated slightly in the sub-stoichiometric or starved air mode to produce volatile gases to fuel the Secondary Chamber while providing good burnout of the fixed carbon in the waste to produce bottom ash. The bottom ash is discharged from the end of the rotary kiln into an ash quench system to cool it rapidly, and from the ash quench pit it is discharged into storage skips. The skips of bottom ash are taken to a licensed [[Landfill|landfill]] site for dispsoal as [[Non-hazardous Waste]]<ref name="SRCL" />.
Waste is loaded mechanically into the Primary Chamber using a hydraulic lift and tip arrangement, to avoid any manual handling of the waste<ref name="SRCL" />. The rotating action of the kiln provides good mixing of the waste, exposing fresh surfaces to combustion conditions<ref name="SRCL" />. The combustion process is operated slightly in the sub-stoichiometric or starved air mode to produce volatile gases to fuel the Secondary Chamber while providing good burnout of the fixed carbon in the waste to produce bottom ash. The bottom ash is discharged from the end of the rotary kiln into an ash quench system to cool it rapidly, and from the ash quench pit it is discharged into storage skips. The skips of bottom ash are taken to a licensed [[Landfill|landfill]] site for dispsoal as [[Non-Hazardous Waste]]<ref name="SRCL" />.
 
The combustion gases produced in the Primary Chamber then pass into the Secondary Chamber, which operates at a minimum temperature of 850°C during start-up using [[Non-Hazardous Waste]]; and at a minimum temperature of 1000°C when [[Hazardous Waste]] may be loaded<ref name="SRCL" />. The Secondary Chamber provides a minimum of two seconds residence time under oxygen-rich conditions to combust and Carbon Monoxide and volatile organic compounds produced in the Primary Chamber<ref name="SRCL" />.


==References==
==References==
<references />
<references />

Revision as of 11:58, 27 May 2021

Clinical Waste Incinerator operated by Stericycle (SRCL) Ltd and located at the Royal Oldham Hospital.

Summary

Clinical Waste Incinerator operated by Stericycle (SRCL) Ltd and located at the Royal Oldham Hospital. The plant consists of a single stream, rated at 850 kilograms per hour or 7446 tonnes per annum of solid wastes[1]. The plant consists of a single stream, rated at 850 kilograms per hour or 7446 tonnes per annum of solid wastes. The Primary Chamber operates the rotary kiln design to provide good mixing of the waste coupled to sufficient retention time to burn the wastes to a high quality ash[1].

Plant

Waste is loaded mechanically into the Primary Chamber using a hydraulic lift and tip arrangement, to avoid any manual handling of the waste[1]. The rotating action of the kiln provides good mixing of the waste, exposing fresh surfaces to combustion conditions[1]. The combustion process is operated slightly in the sub-stoichiometric or starved air mode to produce volatile gases to fuel the Secondary Chamber while providing good burnout of the fixed carbon in the waste to produce bottom ash. The bottom ash is discharged from the end of the rotary kiln into an ash quench system to cool it rapidly, and from the ash quench pit it is discharged into storage skips. The skips of bottom ash are taken to a licensed landfill site for dispsoal as Non-Hazardous Waste[1].

The combustion gases produced in the Primary Chamber then pass into the Secondary Chamber, which operates at a minimum temperature of 850°C during start-up using Non-Hazardous Waste; and at a minimum temperature of 1000°C when Hazardous Waste may be loaded[1]. The Secondary Chamber provides a minimum of two seconds residence time under oxygen-rich conditions to combust and Carbon Monoxide and volatile organic compounds produced in the Primary Chamber[1].

References

  1. 1.0 1.1 1.2 1.3 1.4 1.5 1.6 Annual Performance Report 2020 for SRCL Oldham Clinical Waste Incinerator