Refuse Collection Vehicle

From Wikiwaste
Revision as of 15:07, 2 August 2022 by Bin52 (talk | contribs) (→‎Rotopress)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

An RCV or Refuse Collection Vehicle is a type of lorry used to empty Wheelie Bins at a waste producers' premises without the removal of the Wheelie Bin from the site. The lorry works in a similar way to a REL Lorry but uses a 'comb' lifting device that hooks under the lip of Wheelie Bin (see Wheelie Bin WikiWaste page) to allow it be lifted and emptied into the rear of the lorry (hence it is also sometimes called a 'rear end loader'). An RCV can lift two smaller Wheelie Bins such as a 240 litre capacity, or one larger Wheelie Bin such as a 1100 litre capacity. A Kerbside Collection Lorry can also be termed an RCV but this type of lorry is separately listed on WikiWaste.

RCV Commercial Collection emptying 1100 litre Wheelie Bin, all rights reserved Veolia
RCV Commercial Collection emptying 1100 litre Wheelie Bin, all rights reserved Veolia


Summary

An RCV or Refuse Collection Vehicle is a type of lorry used to empty Wheelie Bins at a waste producers' premises without the removal of the Wheelie Bin from the site. The lorry works in a similar way to a REL Lorry but uses a 'comb' lifting device that hooks under the lip of Wheelie Bin (see Wheelie Bin WikiWaste page) to allow it be lifted and emptied into the rear of the lorry (hence it is also sometimes called a 'rear end loader'). An RCV can lift two smaller Wheelie Bins such as a 240 litre capacity, or one larger Wheelie Bin such as a 1100 litre capacity. A Kerbside Collection Lorry can also be termed an RCV but this type of lorry is separately listed on WikiWaste.

Process

The Wheelie Bin has a lip on the front edge opposite the hinge of the lid, which locates on a 'comb' lifting unit attached to the rear of the lorry. When the comb is engaged the bin is lifted and pivots on the rear of the lorry, and empties its contents into the rear of lorry. The point of waste deposit into the lorry is called a hopper, and within this unit there is a hydraulic ram that pushes the waste into the body of the lorry via a blade through a series of compacting cycles)(see diagram below). This compaction allows multiple bins of compressible waste (such as Cardboard and/or Residual Waste) to be emptied and compacted into the lorry to optimise the weight and the logistics associated with onward transportation for processing. At the point of unloading, the rear section of the lorry, including the compacting hopper unit, opens upwards at the rear of the lorry, and a separate hydraulic ram is then used to push the collected waste out of the vehicle.

Rear Loader Refuse Truck and Hydraulics Layout, all rights reserved Wastebuilt and Eagle Hydraulics
Rear Loader Refuse Truck and Hydraulics Layout, all rights reserved Wastebuilt and Eagle Hydraulics
nJYeeToFu0o|450|inline| | |start=35&end=139}}
Cross Section Example of RCV Showing Hydraulic Rams Video Footage of RCV by Hyva

Other Configurations

The body of an RCV can be configured to collect multiple materials, something which has become more common since the early 2000's. This might include, for example, a split body to facilitate a Twin Stream Collection and/or an additional separate non-compacting section for food waste at the front of the lorry (often known as a 'pod') with its own lifting device on the side of the RCV. Three examples of the main configuration options are set out below.

Split Body

Example of Split Body RCV for Twin Stream Collection - the pictures and video footage below show a 70/30 split body, but other configurations are possible.

2015 Dennis Elite 70/30 Split Body Refuse Truck, all rights reserved Dennis Eagle
2015 Dennis Elite 70/30 Split Body Refuse Truck, all rights reserved Dennis Eagle
Ak8fNYkD1p8|450|inline| | |start=24&end=148}}
Picture of Split Body RCV by Dennis Eagle Video Footage of Split Body RCV by Dennis Eagle

'POD' Configuration

Example of 'pod' on front of on RCV for Food Waste Collection - the pictures show this on a larger RCV lorry, but this can be configured on a smaller lorry dedicated to Food Separate collection arrangements where there is no compaction in the body of the vehicle.

RCV with food 'pod' at front of lorry with separate lifting mechanism, all rights reserved Specialist Fleet Services
RCV with food 'pod' at front of lorry with separate lifting mechanism, all rights reserved Specialist Fleet Services
nJqS2lrVxi0|450|inline| | |start=3&end=36}}
Picture of 'POD' on the front of an RCV Video Footage of a 'POD' with lifting device for Wheelie Bin

Rotopress

The Rotopress style of RCV is less widely adopted in the UK, but can be used for the same range of activities as the RCV configurations described above. It is often seen to have specific benefits in collecting green waste (potentially mixed with food waste as a Green Comingled arrangement) due to the way it mixes the waste during collection.

Picture of Rotopress RCV, all rights reserved FAUN
Picture of Rotopress RCV, all rights reserved FAUN
UHXJPCBpkTc|350|inline}}
Picture of Rotopress RCV by FAUN Video Footage of Rotopress RCV by FAUN

Sizes

The overall size of an RCV can be specified according to the chassis size (and is expressed in terms of weight of the vehicle) and intended bodies that sit on the chassis. The choice may therefore reflect the configuration of the RCV required, or often is a reflection of the width and access limits on a collection route - for example smaller narrow bodied vehicles for inner-city restricted access or country lanes in more rural areas.

Isuzu 7.5 tonne RCV , all rights reserved HGV traders
Isuzu 7.5 tonne RCV , all rights reserved HGV traders
Fulongma 18 tonne RCV. all rights reserved Fulongma
Fulongma 18 tonne RCV. all rights reserved Fulongma
Dennis 26 tonne RCV, all rights reserved HGV Traders
Dennis 26 tonne RCV, all rights reserved HGV Traders
7.5 and 12 Tonne Truck - note single axle at rear 15 and 18 tonne Truck - note single axle at rear 26 and 32 Tonne Truck - note twin axle at rear